Introduction

In some labs, observation equipment is installed to monitor participants during experiments. These tools, such as cameras and microphones, allow researchers to observe behavior, interactions, and responses in a controlled environment without interfering with the natural flow of the study. In many cases, the sessions can also be recorded, enabling researchers to review the footage later for further analysis and documentation.

How to use the observation equipment in PdlC

Press the red switch to turn on the system.

Turn on PC.

Start up the ATEM software Control.

The buttons here you use to choose which camera you want to be recorded.

These buttons can be used to switch a cam to your preview screen. This camera is controllable with the controller (if supported).

This switch can be used to get your preview screen to your program screens smoothly.

Make sure you check if there is audio. You can do this by clicking the capture tab. If you see the audio bars moving, you’re all set.

How to use the observation equipment in Sylvius